-
Product Featuresarrow_drop_down
- To seal vertical or horizontal conduit runs where 40 PCT conductor fill is required
- To minimize the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit
- Use with type EYC sealing compound and type EYF fiber
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Prevent pressure piling within conduit system
- Required in class I, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, division 2 locations
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Allow up to 40% conduit fill in compliance with the national electrical code
-
Specificationsarrow_drop_down
- Country of Origin: MX
- Dimensions: 1-3/4 in Dia x 4-5/16 in L
- Finish: Electroplated Zinc
- Material: Malleable Iron
- Mfg Standards/Approvals: UL File No. E34997|CSA 009795 for Wet Locations|Class I Division 1/2 Group A/B/C/D, Class I Zone 1/2 Group IIA, IIB and IIC, Class II Division 1/2 Group E/F/G, Class III|UL 886|CSA C22.2 No. 30|NEC 500-503/505|Mil-F-28675
- Package Height: 0.86 in
- Package Length: 6.8 in
- Package Weight: 1.85 lb
- Package Width: 5.2 in
- Size: 3/4 in
- Suitable For Use With: IMC/Rigid Metal Conduit
- Type: Type EYAX Dust-Ignitionproof Explosionproof Horizontal Vertical
- Warranty: Limited
-
Resourcesarrow_drop_down
-
Tagsarrow_drop_down
